Not logged inRybka Chess Community Forum
Up Topic The Rybka Lounge / Computer Chess / CTG specification
- - By Sesse (****) Date 2007-09-30 10:23 Edited 2007-09-30 10:33
This could be interesting. (For some reason, the forum plain refuses to let me post anything with "0xcc" and then a colon in it, so I mangled the original .txt file.)

The CTG (Chessbase book) format
Unofficial specification, version 0.2 (incomplete).
This document is placed in the public domain by its author.

0. Structure

Each Chessbase book consists of four files:

  - The .INI file, which contains some auxilliary information. Being a text
    file, it's mostly self-explanatory and will not be treated here.
  - The .CTG file, which contains all the real data. This is described in
    chapter 1.
  - The .CTB file, which is unknown but conjectured to be some kind of bitmap
    over free pages in the .CTG file. Only described very loosely, in chapter
  - The .CTO file, which contains a lookup table into the CTG file for fast
    lookups. The format of this is only partially known, but is described in
    chapter 3.

1. The CTG file

1.1. General conventions

The following conventions apply:

  - All integers are stored in big-endian format, whether they are 2, 3 or 4
    bytes long.
  - Whenever a length of a block is stored, the number generally includes the
    length byte itself.
  - There is no alignment of values, except that pages are aligned on
    4096-byte boundaries.

The CTG file is divided into 4096 byte pages.

1.2. Header page

The first page is the header page which contains some general information
about the file:

  - At offset 28, a 4-byte value is stored, denoting the number of games
    "stored" in the field. There is also some other (unknown) data in the
    first 32 bytes.
  - At offset 1024 (0x400), 32 unknown bytes are stored.
  - At offset 2048 (0x800), 32 unknown bytes are stored.

The other bytes in the header page are unused.

1.3. Data pages

After the first page, all the other pages store positions. The first data
page (starting at offset 4096) is denoted "page 0", the next is "page 1",
etc.. The page numbers are used in the CTO file.

In general, what is looked up in the CTG format is positions, although
possible moves from each position are also stored. This enables the format to
deal with transpositions. Each page stores one or more positions in random
order. It is not known how Chessbase decides what page to put each position
in, but it is conjectured to be based on hash value (see the section about
the CTO format below).

Each data page starts with a brief header:

  - At offset 0 in the page, a 2-byte integer is stored, telling the number
    of positions stored in the page.
  - At offset 2, a 2-byte integer is stored, giving the number of bytes
    stored in the page (including the four header bytes). Note that after
    this, there may be random junk data, so be sure to stop reading the
    page after reaching the given number of bytes.

At offset 4, the first position entry starts. Position entries then follow
directly after each other until the end of the page (ie. the number of bytes
specified in the header).

1.4. Position storage

Note that this specification distinguished between position entries and
positions. A position is a chess position, with information about castling
rights and en passant move. (The CTG format does not store any information
about the 50-move rule or move history.) A position entry contains a position
and book information about the position:

The position entry contains a position, the book moves, and some information
associated with the position. (In general, most of the information that seem
to be associated with moves in the Chessbase GUI actually stems from looking
it up in the resulting position.)

1.4.1. Symmetry

Every position is stored as if white is to move. If black is to move,
invert the white/black pieces and flip the board vertically (so a1 <-> a8, a2
<-> a7, etc.). Due to the symmetry of chess this will give the same result.

After this inversion (if any), check if the white king is in the left half
of the board (columns one through four). If it is, and neither side has any
castling rights remaining, flip the board horizontally (so a1 <-> h1,
a2 <-> h2, etc.). Naturally, the en passant square is also flipped.

1.4.2. Header byte

Each position entry begins with a header byte:

  - The lower five bits (x & 0x1f) describe the length of the position
    itself, in bytes, including the header byte.
  - If the sixth bit (x & 0x20) is set, the position contains en passant
    information. This happens if and only if an en passant capture is
  - If the seventh bit (x & 0x40) is set, the position contains castling
    information. If not, neither side can castle. (The bit is never set
    if neither side can castle.)
  - The eighth bit (x & 0x80) is unused.

1.4.3. Chess board

After the header byte, the position itself is encoded. The position is stored
using a Huffman encoding and as such uses a variable number of bits. The
bit-packing convention is the usual one, with the first bit in the MSB (0x80)
of the first byte, any any excess bits at the end being set to zero,

The position is encoded starting at the a1 square, then the a2 square, up to
a8, b1, b2, etc.. Each square is encoded as follows:

  0       Empty square
  11c     Pawn (c=1 means black, c=0 means white)
  1011c   Rook
  1010c   Bishop
  1001c   Knight
  10001c  Queen
  10000c  King

1.4.4. Alignment padding bits

At this point, padding bits may be inserted. The rules are somewhat complex:
First, if the position ended exactly on a byte, there are no castling rights
and no en passant column, insert a full zero byte at this point, and ignore
the rest of this section.

Otherwise, define a number N as follows, based on whether there is an en
passant square (E=1, otherwise E=0) and if castling is stored (C=1, otherwise

  E=0, C=0: N=8
  E=0, C=1: N=4
  E=1, C=0: N=3
  E=1, C=1: N=7

If there are not exactly N bits left in the current byte, insert zero bits
as needed (possibly as many as seven) until there is. This alignment scheme
ensures that the last data bit ends exactly on a byte boundary.

1.4.5. En passant column

If en passant information is stored (see 1.4.2), it follows (still bitpacked)
immediately after the padding. Three bits store the column, where 000=a,
001=b, 010=c, etc..

1.4.6. Castling rights

If castling rights are stored (see 1.4.2), it follows (still bitpacked) at
this point. The castling rights are stored as four bits, storing in turn
black kingside castling rights (1 = can castle, 0 = can not castle), black
queenside castling rights, and then the same for white.

1.4.7. Position end

At this point, the bit-packing ends. As mentioned in section 1.4.4, this
should be exactly on a byte boundary, so no further padding should be needed.

1.4.8. Book moves

After the position, any book moves (excluding unplayed transpositions) are
stored. First, there is a header byte telling the number bytes used for book
moves (including the header byte itself). Each move is stored in two bytes,
and as such the header byte contains the value (2 * the number of moves) + 1.

The first byte of each move contains the move itself, and the second byte
contains the move annotation, if any. The encoding of moves is slightly
unusual -- in general, a look-up table is needed to decode the move
information. Every possible byte can then be looked up into the combination
(piece, relative movement).

The "piece" is in general something like "knight 2". Here, the board is
searched for a white piece of the appropriate type in the same ordering as
the board storage: If a white knight is on a1 it is always "knight 1" (since
no squares are before a1 in this ordering).

The "relative movement" is the number of squares the piece is to move from
its current position, for instance "two squares forward and one to the right"
for a typical knight move. Note that the board is taken to wrap around on all
four sides, so "forward seven squares" is exactly the same as "backwards one
square" and will be encoded using the same byte. Long and short castling have
their own bytes. (It is not known whether the format can represent castling
in Chess960.)

Note that in this encoding, some legal but obscure moves can not be stored.
In particular, promotions are automatically assumed to be to queen, so an
underpromotion can simply not be stored. Also, there are no moves for "queen
5" or above, so if there are more than four queens on the board, moves for
the fifth can not be entered. (In the case of underpromotion, however, the
GUI actually stores the position as "pawn N forward one square" as usual, but
when trying to look up the position later, it cannot find a position with a
queen on the 8th rank, and thus will simply hide the move in the GUI.) In
general, this should not be a problem for an opening book.

An incomplete table of move encoding follows. This encompasses all possible
moves for the sixteen (white) pieces that are initially found on a chess
board, as well as for an extra queen, which should be sufficient for most
books, especially as underpromotion is not supported. A later version may
include the moves for queen 3, rook 3, etc..

  0x00: Pawn 5    f1 r1
  0x01: Knight 2  b1 l2
  0x03: Queen 2   r2
  0x04: Pawn 2    f1
  0x05: Queen 1   f1
  0x06: Pawn 4    f1 l1
  0x08: Queen 2   r4
  0x09: Bishop 2  f6 r6
  0x0a: King      b1
  0x0c: Pawn 1    f1 l1
  0x0d: Bishop 1  f3 r3
  0x0e: Rook 2    r3
  0x0f: Knight 1  b1 l2
  0x12: Bishop 1  f7 r7
  0x13: King      f1
  0x14: Pawn 8    f1 r1
  0x15: Bishop 1  f5 r5
  0x18: Pawn 7    f1
  0x1a: Queen 2   f6
  0x1b: Bishop 1  f1 l1
  0x1d: Bishop 2  f7 r7
  0x21: Rook 2    r7
  0x22: Bishop 2  f2 l2
  0x23: Queen 2   f6 r6
  0x24: Pawn 8    f1 l1
  0x26: Bishop 1  f7 l7
  0x27: Pawn 3    f1 l1
  0x28: Queen 1   f5 r5
  0x29: Queen 1   r6
  0x2a: Knight 2  b2 r1
  0x2d: Pawn 6    f1 r1
  0x2e: Bishop 1  f1 r1
  0x2f: Queen 1   r1
  0x30: Knight 2  b2 l1
  0x31: Queen 1   r3
  0x32: Bishop 2  f5 r5
  0x34: Knight 1  f2 r1
  0x36: Knight 1  f1 r2
  0x37: Queen 1   f4
  0x38: Queen 2   f4 l4
  0x39: Queen 1   r5
  0x3a: Bishop 1  f6 r6
  0x3b: Queen 2   f5 l5
  0x3c: Bishop 1  f5 l5
  0x41: Queen 2   f5 r5
  0x42: Queen 1   f7 l7
  0x44: King      b1 r1
  0x45: Queen 1   f3 r3
  0x4a: Pawn 8    f2
  0x4b: Queen 1   f5 l5
  0x4c: Knight 2  f2 r1
  0x4d: Queen 2   f1
  0x50: Rook 1    f6
  0x52: Rook 1    r6
  0x54: Bishop 2  f1 l1
  0x55: Pawn 3    f1
  0x5c: Pawn 7    f1 r1
  0x5f: Pawn 5    f2
  0x61: Queen 1   f6 r6
  0x62: Pawn 2    f2
  0x63: Queen 2   f7 l7
  0x66: Bishop 1  f3 l3
  0x67: King      f1 r1
  0x69: Rook 2    f7
  0x6a: Bishop 1  f4 r4
  0x6b: O-O
  0x6e: Rook 1    r5
  0x6f: Queen 2   f7 r7
  0x72: Bishop 2  f7 l7
  0x74: Queen 1   r2
  0x79: Bishop 2  f6 l6
  0x7a: Rook 1    f3
  0x7b: Rook 2    f6
  0x7c: Pawn 3    f1 r1
  0x7d: Rook 2    f1
  0x7e: Queen 1   f3 l3
  0x7f: Rook 1    r1
  0x80: Queen 1   f6 l6
  0x81: Rook 1    f1
  0x82: Pawn 6    f1 l1
  0x85: Knight 1  f2 l1
  0x86: Rook 1    r7
  0x87: Rook 1    f5
  0x8a: Knight 1  b2 r1
  0x8b: Pawn 1    f1 r1
  0x8c: King      b1 l1
  0x8e: Queen 2   f2 l2
  0x8f: Queen 1   r7
  0x92: Queen 2   f1 r1
  0x94: Queen 1   f3
  0x96: Pawn 2    f1 r1
  0x97: King      l1
  0x98: Rook 1    r3
  0x99: Rook 1    f4
  0x9a: Queen 1   f6
  0x9b: Pawn 3    f2
  0x9d: Queen 1   f2
  0x9f: Bishop 2  f4 l4
  0xa0: Queen 2   f3
  0xa2: Queen 1   f2 r2
  0xa3: Pawn 8    f1
  0xa5: Rook 2    f5
  0xa9: Rook 2    r2
  0xab: Queen 2   f6 l6
  0xad: Rook 2    r4
  0xae: Queen 2   f3 r3
  0xb0: Queen 2   f4
  0xb1: Pawn 6    f2
  0xb2: Bishop 1  f6 l6
  0xb5: Rook 2    r5
  0xb7: Queen 1   f5
  0xb9: Bishop 2  f3 r3
  0xbb: Pawn 5    f1
  0xbc: Queen 2   r5
  0xbd: Queen 2   f2
  0xbe: King      r1
  0xc1: Bishop 1  f2 r2
  0xc2: Bishop 2  f2 r2
  0xc3: Bishop 1  f2 l2
  0xc4: Rook 2    r1
  0xc5: Rook 2    f4
  0xc6: Queen 2   f5
  0xc7: Pawn 7    f1 l1
  0xc8: Pawn 7    f2
  0xc9: Queen 2   f7
  0xca: Bishop 2  f3 l3
  0xcb: Pawn 6    f1
  0xcc  Bishop 2  f5 l5
  0xcd: Rook 1    r2
  0xcf: Pawn 4    f1
  0xd1: Pawn 2    f1 l1
  0xd2: Knight 2  f1 r2
  0xd3: Knight 2  f1 l2
  0xd7: Queen 1   f1 l1
  0xd8: Rook 2    r6
  0xd9: Queen 1   f2 l2
  0xda: Knight 1  b2 l1
  0xdb: Pawn 1    f2
  0xde: Pawn 5    f1 l1
  0xdf: King      f1 l1
  0xe0: Knight 2  b1 r2
  0xe1: Rook 1    f7
  0xe3: Rook 2    f3
  0xe5: Queen 1   r4
  0xe6: Pawn 4    f2
  0xe7: Queen 1   f4 r4
  0xe8: Rook 1    f2
  0xe9: Knight 1  b1 r2
  0xeb: Pawn 4    f1 r1
  0xec: Pawn 1    f1
  0xed: Queen 1   f7 r7
  0xee: Queen 2   f1 l1
  0xef: Rook 1    r4
  0xf0: Queen 2   r7
  0xf1: Queen 1   f1 r1
  0xf3: Knight 2  f2 l1
  0xf4: Rook 2    f2
  0xf5: Bishop 2  f1 r1
  0xf6: O-O-O
  0xf7: Knight 1  f1 l2
  0xf8: Queen 2   r1
  0xf9: Queen 2   f6
  0xfa: Queen 2   r3
  0xfb: Queen 2   f2 r2
  0xfd: Queen 1   f7
  0xfe: Queen 2   f3 l3

After the byte describing the move, the annotation for that move is stored as
a single byte:

  0x00: No annotation
  0x01: !
  0x02: ?
  0x03: !!
  0x04: ??
  0x05: !?
  0x06: ?!
  0x08: Only move
  0x16: Zugzwang

Note that the other annotations (=, Unclear, =+, etc.) belong to the position
and not the move, as described in section 1.4.13.

1.4.9. Position statistics

After all moves and annotations have been encoded, the statistics for this
position are stored:

  - First, a three-byte integer describing the number of games for this
    position. This is the number reported in parenthesises after "N = 12345"
    in Chessbase. (The "real" N number is the sum of the number of wins,
    draws and losses.)
  - Then, three bytes describing the number of wins for white (1-0). Remember
    that the position is always stored from white's perspective, so if black
    is to move, one will need to swap the numbers for 1-0 and 0-1.
  - Then, three bytes describing the number of wins for black (0-1).
  - Then, three bytes describing the number of draws (1/2).

The percentages and performance percentages are calculated from these
numbers, seemingly with correct rounding.

1.4.10. Unknown integer

After the statistics, an unknown 4-byte integer is stored. It is almost
always zero, but sometimes another small number (typically in the single

1.4.11. Ratings

After the unknown integer, rating information for this position is stored.
There are two ratings. Both are stored first as a number of games (this is
the number shown after the "-" to the lower right in Chessbase) in three
bytes, and then the sum of the ratings in four bytes. To get the average
rating (the number shown before the "-"), divide the second number by the
first number (guarding for division by zero).

The performance rating is calculated from these ratings and the position

1.4.12. Engine recommendations

After the ratings, a single byte is stored for the position's
recommendations. The possibilities are:

  0x00: No special preference
  0x40: Don't play in tournaments (red in the GUI)
  0x80: Main move (green in the GUI)

Other values have been spotted (0x04, 0a10, 0x14, 0x20, 0x60, 0xa0), without
knowing exactly what they are. It may be that this is actually a bit field.

Again, note that this value belongs to the position entry, not the move, so
when checking a move's desirability, one will need to look up the resulting
position and check this byte.

After the engine recommendation, a second unknown byte is stored. This may be
a weight somehow, or it may be something else.

1.4.13. Position commentary

Finally for the position, the commentary is stored as a single byte. The
following values are legal:

  0x00: None
  0x0b: =
  0x0d: Unclear
  0x0e: =+
  0x0f: +=
  0x10: -/+
  0x11: +/-
  0x13: +-
  0x20: Development adv.
  0x24: Initiative
  0x28: With attack
  0x2c: Compensation
  0x84: Counterplay
  0x8a: Zeitnot
  0x92: Novelty

2. The CTB file

Unknown, except that it may be a bit field of some sort over the pages in the
CTG file. However, two values are of special interest:

  - The lower storage bound, a 4-byte integer stored at offset 4.
  - The upper storage bound, a 4-byte integer stored at offset 8.

The usage of these bounds will be clear from section 3.

3. The CTO file

Note that the CTO file is not as well understood as the CTG file. As such,
the information presented here is mainly guesswork, and may be wrong.

The CTO file is an index into the CTG file, for rapid lookup. It is believed
to be a simple hash table, with no forms of overflow, so only a single lookup
in the CTO file is required to find the right page in the CTG file for a
given position. (It is guessed that if a given page in the CTG file becomes
too big, the number of pages is increased and all the positions moved

The CTO file starts with sixteen header bytes. At file offset 4, a 4-byte
integer is stored, describing the number of entries in the CTO file. (This
seems to neither be a prime nor a power of two.)

After the header, four bytes are stored for each entry. When looking up a
position, the position is hashed, and the hash value is reduced relative to
the number of index entries. The appropriate four-byte value in the CTO file
is then looked up based on the hash. The number is a page number in the
CTG file, which is then read and searched for the position. (If the page in
the CTG file does not actually contain the position, the GUI seems to simply
fail the lookup, so there appears to be no provision for traditional
overflowing.) -1 (ff ff ff ff) means that no positions with this (reduced)
hash value exists. More than one hash value may point to the same page in the
CTG file.

The code for computing a 32-bit hash from a position (which is encoded
exactly as in the CTG file, including the header byte) is the equivalent
of this C code:

  unsigned int tbl[] = {
          0x3100d2bf, 0x3118e3de, 0x34ab1372, 0x2807a847,
          0x1633f566, 0x2143b359, 0x26d56488, 0x3b9e6f59,
          0x37755656, 0x3089ca7b, 0x18e92d85, 0x0cd0e9d8,
          0x1a9e3b54, 0x3eaa902f, 0x0d9bfaae, 0x2f32b45b,
          0x31ed6102, 0x3d3c8398, 0x146660e3, 0x0f8d4b76,
          0x02c77a5f, 0x146c8799, 0x1c47f51f, 0x249f8f36,
          0x24772043, 0x1fbc1e4d, 0x1e86b3fa, 0x37df36a6,
          0x16ed30e4, 0x02c3148e, 0x216e5929, 0x0636b34e,
          0x317f9f56, 0x15f09d70, 0x131026fb, 0x38c784b1,
          0x29ac3305, 0x2b485dc5, 0x3c049ddc, 0x35a9fbcd,
          0x31d5373b, 0x2b246799, 0x0a2923d3, 0x08a96e9d,
          0x30031a9f, 0x08f525b5, 0x33611c06, 0x2409db98,
          0x0ca4feb2, 0x1000b71e, 0x30566e32, 0x39447d31,
          0x194e3752, 0x08233a95, 0x0f38fe36, 0x29c7cd57,
          0x0f7b3a39, 0x328e8a16, 0x1e7d1388, 0x0fba78f5,
          0x274c7e7c, 0x1e8be65c, 0x2fa0b0bb, 0x1eb6c371

  unsigned int gen_hash(signed char *ptr, unsigned len)
          signed hash = 0;
          short tmp = 0;
          int i;

          for (i = 0; i < len; ++i) {
                  signed char ch = *ptr++;
                  tmp += ((0x0f - (ch & 0x0f)) << 2) + 1;
                  hash += tbl[tmp & 0x3f];
                  tmp += ((0xf0 - (ch & 0xf0)) >> 2) + 1;
                  hash += tbl[tmp & 0x3f];
          return hash;

Note that this code may not be 64-bit clean, as it relies on 32-bit overflow
behavior of the addition to the hash variable.

The reduction of this 32-bit hash to a value in the CTO file is not
completely known. The following C code is believed to approximate the
lookup, and is worst-case O(log n) (usually much better) in the number of
index entries:

  for (int n = 0; n < 0x7fffffff; n = 2*n + 1) {
        unsigned c = (hash & n) + n;

        if (c < lower_bound)


        if (c >= upper_bound)

Here, lower_bound and upper_bound are the values found in the CTB file as
described in section 2. search_page() indicates that the given value should
be looked up in the CTO file, and the resulting page in the CTG file (if
any) should be searched for the given position. ChessBase itself seems to
have more conditional logic around search_page(), but unless you want
to make new CTG files yourself this uncertainity should not be a big
Parent - - By dobrocinek (*) Date 2007-10-01 03:15
The CTG (Chessbase book) format
Unofficial specification, version 0.2 (incomplete).
This document is placed in the public domain by its author.

seams to be piece of good work.. of unknown author :)
Parent - - By Sesse (****) Date 2007-10-01 14:41
I'd guess the author doesn't want to be a target of ChessBase. :-)

/* Steinar */
Parent - - By shiv Date 2009-08-23 06:13 Edited 2009-08-23 07:05
Did not mean to reopen a thread article 2 years old. Only noticed that now. It is in fact fine according to DMCA and EU laws to reverse engineer software formats such as CTG if the goal is to provide interoperability.
Parent - By Sesse (****) Date 2009-08-23 20:21
Perhaps, but the fact that someone would have a weak case in court never kept them from being unpleasant =)

/* Steinar */
Parent - - By Sesse (****) Date 2009-08-24 12:19
Jimmy MÃ¥rdell has published information about the CBH format as well on TalkChess:

I don't use ChessBase, so I have no idea what the difference between CTG and CBH are, but I'm sure there are interested people here. :-)

/* Steinar */
Parent - By Fulcrum2000 (****) Date 2009-08-24 18:02
Nice read, thanks for the link!
Parent - By ernest (****) Date 2009-08-24 20:40

> I don't use ChessBase, so I have no idea what the difference between CTG and CBH are

... just for culture de base (?) :

CTG   book
CBH   database
Parent - - By sriliam Date 2011-03-27 11:25
Hi everyone,

Nice post : I wrote a "beginning" program to convert ctg file to pgn which seems to be wanted and interesting to do, I am computer programmer.
There's a little forgot in ctg description first, alignment is good when 3 more statistics byte in 1.4.9 Position Statistics is added.
Thus, if you read carefully, you take 33 bytes offset for each next position entry.

That is not my purpose, the converter is only able for now to read ctg file and give a position suite for each page.
I found some position like in fen format : rn1qkbnr/pbpppppp/1p6/8/4P3/8/PPPP1PPP/RNBQKBNR w, position given at third position of page 50 in Handicap.ctg (272 kB).
What about white to play in that position ? Seems to be inverted. I don't play chess but are we sure that position is load for white playing turn ?

I need a "better" paper than the one of this post, especially for other file, cto and ctb : work is very good in first approach but not for the deep story.
I can let my some weeks of work file program : does anyone want to participate ?

Best regards.

p.s. : all of this is legal :
Parent - - By sriliam Date 2011-03-30 19:08

Need to answer myself : after reread, specifications are clear except what I already notice about 33 bytes between two positions.
Sorry for waste time reading my last post.

I hope have a functional ctg to book.bin converter on July.
See ya.
Parent - By sriliam Date 2011-08-12 16:16 Edited 2011-08-12 16:31
Need to work in other direction, i.e., not chess.
See ctg_reader of what I done.
It takes a ctg file and make two db file : one for white side, one for black side.
The key for the b-tree is taken directly from Hauffman dictionary form explain on this post.
I need a correct engine to give me all position from a given one to finish.
Contact me if you are interest.
- By Ladyhawk (*) Date 2010-02-16 10:31

I just discovered this interesting post.
Doe's anyone know if its possible to change the engine recommendations in a ctg book with a hex editor like UltraEdit.
And haw exactly it can be done?
Maybe with search and replace?

I want to make all the moves green for both colors.
To do engine vs engine matches to convert to pgn format.
I could use the add priority analyses function in fritz, but that way the books aren't from eco relative length anymore.

Regards, Jonathan
- By Pia (****) Date 2013-04-06 01:05
Many thanks. I was googling about CTG format and found this topic.

Just wrote program which removes junk data from CTGs, making them smaller by ~10% (when compressed).

Next task is to remove (or add) all move marks if I succeed...
- - By Pia (****) Date 2013-04-08 21:26 Edited 2013-04-08 21:29

>1.4.10. Unknown integer

>After the statistics, an unknown 4-byte integer is stored.

Also I found another unknown seven bytes before that.

Yes, I think my program can read CTG files now!
Not for chess play but to remove unused data, move marks, etc.

P.s. Here's my program's output example for position
poslen 20
movlen 2

games 0 0 1
white 0 0 0
black 0 0 0
draw 0 0 1
? 0 0 0 5 0 0 1
? 0 0 10 142
rating low 0 0 1
rating high 0 0 10 233
recomend 0
weight 0
comment 0
Parent - By Pia (****) Date 2013-04-08 22:25
Oh, sorry, correction! There's two ratings actually.

Here's new output example:

block 1
pos 39
size 2189

poslen 20
movlen 2

games 0 0 1
white 0 0 0
black 0 0 1
draw 0 0 0
unknown 4 bytes 0 0 0 0
Elo rating number of performed players 0 0 1
Elo rating sum of performed Elo 0 0 10 117
average Elo rating number of players 0 0 1
average Elo rating sum of players 0 0 10 142
recomend 0
weight 0
comment 0
Up Topic The Rybka Lounge / Computer Chess / CTG specification

Powered by mwForum 2.27.4 © 1999-2012 Markus Wichitill